TinySA ULTRA 100kHz-5.3GHz Handheld Spectrum Analyzer RF Generator with 4-inch Display and Battery

Description

100% original, designed and produced by hugen (zeenko).
We are an officially authorized store, please feel free to purchase.
Features:
– Screen size 3.95 inch(≈4 inch)
– Spectrum Analyzer for 0.1-800MHz or, with Ultra mode enabled, 0.1MHz-6GHz
– Signal Generator with sine wave output between 0.1-800MHz or square wave or dual tone output up to 4.4GHz when not used as Spectrum Analyzer.
– Switchable resolution bandpass filters for both ranges between 200Hz and 850kHz
– Built-in 20dB optional LNA
– Color display showing 450 scan points covering up to the full frequency range.
– Input Step attenuator from 0dB to 31dB (not in combination with LNA).
– A built-in calibration signal generator that is used for automatic self test and (low) input calibration.
– Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer or Signal Generator
– Rechargeable battery allowing a minimum of at least 2 hours portable use
– Max input level +10dBm. Do not destroy your tinySA
– Due to the low cost and very small form factor there are certain relevant tinySA limitations and tinySA Ultra limitations
The tinySA ULTRA includes:
Host (with 3000mAh battery) x 1
USB Type-C data cable x1
30cm ALSR100 SMA cables x2
SMA-SMA barrel connector x1
Antenna with SMA connector x1
Lanyard and touch plectrum x1
32GB MicroSD card(plugged in the host) x1