Description
ZoeRax UTP 2 Pieces Suit CAT6 RJ45 Modular Plug Connector 8P8C Crimp End for Ethernet Cable, Bulk Cable Connector
Two-Piece Design: ZoeRax CAT 6 RJ45 CONNECTOR terminates unshielded twisted pair cable for making a custom-length Cat 6 Ethernet cable; Supports 23-26 AWG round or flat stranded wire with an outside diameter up to 5.4mm. Each connector with a load bar which is best for installation with passing through conductors
Use Without Worry: Gold plated contacts maintain a superior and reliable data transmission by preventing corrosion last over time; Clear impact-resistant polycarbonate housing is durable for crimping. The connector locking clip can be bent many times without breaking
Wide Applications: 3-Prong contacts pins can straddle both solid and stranded conductors properly. Suitable for CAT6/5E/5 cables and support POE; Used for CCTV, Routers, Switches, Printers, Hubs, PC, and Servers
Quality Made: Plug Housing is made of flame retardant eco-friendly LG PC material, each connector with a load bar which is best for installation with passing through conductors
Package Contains: 50/100 pieces Connectors supports for large projector or multiple uses
CAT6 for STP CABLE
-Technician can easily verify the proper wiring order
Reliable, compliant performance
– Cat6 Connectors are fully RoHS, UL and FCC compliant and are suitable for use in category 6 data networks.
-Rj45 plug adopt 3 prong chip, the contacts are closely attached to the core, and contacts are stabler.
-Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector
-Reduces the distance between the wire twists and contacts improves performance They work with virtually every model of RJ45 crimper tool and 23AWG cable.
Specification:
1.2MM UTP RJ45 Ethernet ends
Special for Cat6 stranded cable and solid wire
Hole Diameter: 1.2MM
Recommended best fit size for wire(Max Insulated wire OD): 1.10-1.16MM
IMPORTANT NOTE:
1. Please straighten the wires and cut it neatly
2. Please select a suitable connector
(If cable diameter is smaller than the recommended size when the cable is crimped, the cable will be biased, resulting in a fail.
If the cable diameter is bigger than the recommended size, it can be difficult to pass through. )
3. Please check that individual wire and connector’s metal contacts are close contact if cables you made with these connectors failed connection tests.
4. If pins were not completely depressed, please note the crimper and the way of using a crimper.
★Please do not hesitate to contact us if you have any queries and issues. We are here to help you until your satisfaction.
Reviews
There are no reviews yet.