Toshiba HDD PCB Logic Board for MQ04UBF100 MQ04UBD200

Description

HDD PCB/Logic Board. Board Number: G0039A G0034A G4330A G3448A G003309A G003250A, The Hard Disk Drive is not include.
The main control of G0034A and G0039A starts with “M”. You need to confirm that the main control chip is the same, otherwise there will be no response when powered on
The pcb number position:
Please Note:
1. These boards are used, the circuit board components not falling, the interface did not break.
2. All PCB have been tested before shipping. If the PCB is faulty during shipping, please inform us immediately after your received it.
3. If you are not sure the PCB is compatible with your HDD or not. Please contact us
Board Number: G0039A G0034A G4330A G3448A G003309A G003250A (Please m ake sure your original PCB board number is same as our PCB)
Replacement the PCB only can solve the problem that is caused by the PCB faulty and HDD failures are not always caused by the PCB faulty. This PCB is not guaranteed to fix your HDD.
Remarks: If your HDD firmware, date code and site code is different. You can swap the BIOS chip from original PCB to the replacement PCB, to make the replacement PCB compatible with your HDD.
Location of BIOS:
Attention: Replacement the PCB only can solve the problem that is caused by the PCB faulty. If your HDD having the following problem.
Symptoms of failure:
The drive will power up normally (no ticking noises, errors etc) but will not be recognized by the computer
The drive will power up normally and be recognized correctly but will report a size of 0 bytes
The drive will power up but report SMART errors on boot
Replacement the PCB may not solve the above problem. These problem is caused by the HDD firmware corrupted.